DragonsDean Enterprise

    The drawing sheets sizes, contents, and title blocks contained in electronics documents. Drawing Sheets Sizes Electronics plans and drawings shall be drawn on drawing sheets of the following sizes: A0 size (841mm x 1189mm) A1 size (594mm x 841mm) A2 size (420mm x 594mm) A3 size (297mm x 420mm) Drawing Scale Appropriate metric drawing scales shall be used. Graphic Scale Since the size of the drawings sheet can be changes photographically, graphic scale shall be shown on each drawing sheets. Contents The content of the plan shall have the following information: ♦ Location and Site Plans ♦ Legend and Symbols ♦ General Notes and or Specifications ♦ Floor plan of Head-end Facility   Shall show the dimension and layout of the following: equipment racks, outlets, lighting, circuit breakers, electrical panel, ventilation and air-conditioning system, generator, battery bank, data center, control and monitoring equipment, studio facility, antenna system, doors and grounding sys...

  To obtain an electronics permit in the Philippines, you'll need to meet the following requirements: Application form Signed by the owner or applicant, and signed and sealed by a professional electronics engineer. Electronics plans Signed by the owner or applicant, and signed and sealed by a professional electronics engineer. Notice of Construction Submitted to the Office of the Building Official before any electronics installation. Certificate of Completion Completed by the licensed supervisor/in-charge and submitted to the building official upon completion of the work. RA9292 Section 29. ... the Professional Electronics Engineer shall be stamped on every sheet/page with said seal, indicating therein his/her current Professional Tax Receipt (PTR) number, date/place of payment and current membership number in the Accredited Professional Organization, when filed with government authorities or when used professionally. Building permit A valid building permit is required Other docume...