DragonsDean Enterprise

    The drawing sheets sizes, contents, and title blocks contained in electronics documents. Drawing Sheets Sizes Electronics plans and drawings shall be drawn on drawing sheets of the following sizes: A0 size (841mm x 1189mm) A1 size (594mm x 841mm) A2 size (420mm x 594mm) A3 size (297mm x 420mm) Drawing Scale Appropriate metric drawing scales shall be used. Graphic Scale Since the size of the drawings sheet can be changes photographically, graphic scale shall be shown on each drawing sheets. Contents The content of the plan shall have the following information: ♦ Location and Site Plans ♦ Legend and Symbols ♦ General Notes and or Specifications ♦ Floor plan of Head-end Facility   Shall show the dimension and layout of the following: equipment racks, outlets, lighting, circuit breakers, electrical panel, ventilation and air-conditioning system, generator, battery bank, data center, control and monitoring equipment, studio facility, antenna system, doors and grounding sys...

  To obtain an electronics permit in the Philippines, you'll need to meet the following requirements: Application form Signed by the owner or applicant, and signed and sealed by a professional electronics engineer. Electronics plans Signed by the owner or applicant, and signed and sealed by a professional electronics engineer. Notice of Construction Submitted to the Office of the Building Official before any electronics installation. Certificate of Completion Completed by the licensed supervisor/in-charge and submitted to the building official upon completion of the work. RA9292 Section 29. ... the Professional Electronics Engineer shall be stamped on every sheet/page with said seal, indicating therein his/her current Professional Tax Receipt (PTR) number, date/place of payment and current membership number in the Accredited Professional Organization, when filed with government authorities or when used professionally. Building permit A valid building permit is required Other docume...

  Photo Credits | David Prado Perucha   There are some rules and a law when dealing with electronic devices. This guide is intended to give customers who wants their establishment or home be installed with a security camera. Camera Location The field of view is essential aspect to get the best picture of the area being protected. Entry points and critical external area need be considered. The height of the camera has to be carefully taken into account. Wired or Wireless Surveillance camera are not DIY kits that you just stick-and-dry, there are building codes necessary for safety. The installer will give the options based on the budget, either it be digital or analog. Camera Connection The rules state that you cannot just lay the wires on anything or scatter signal anywhere. There are the calbe trays, the mounting rack, etc. Mounting and Installing Cameras The recommended manufacturer camera accessories should be used in the installation. Switching the Power Security camera ar...

  The Institute of Electronics Engineers of the Philippines (IECEP, formerly the Institute of Electronics and Communication Engineers of the Philippines) is a Professional Regulation Commission, an  Accredited Professional Organization (APO) recognized organization of Professional Electronics Engineers (PECE), Electronics Engineers (ECE) and Electronics Technicians (ECT) in the Philippines. History of IECEP The Institute of Electronics & Communications Engineers of the Philippines was organized in 1950 by a group of pioneers in the electronics and communications fields in the country, which included Dean Jose S. Alfonso, Mamerto Buenafe, Fred Carino, Ciriaco Coronel, Jose Grey, Alfredo Albino Lara and Venancio Pineda. Dean Alfonso served as the Founding President of the organization. It was during the term of Engr. Rosauro Calupitan (1968-1970) when Republic Act. No. 5734 was enacted into law, by the virtue of which the Electronics & Communication Engineering (ECE) ...